Follow

Software Update

We’ll periodically update the software on your Navdy display. Updates are downloaded to the Navdy app on your phone when connected to wifi. The next time your phone pairs to the Navdy display, the app will automatically transfer the update from your phone to the Navdy.

Here’s how to manually check for an update in the app: 

iOS App 

  1. Tap the Settings tab
  2. Tap Navdy Display
  3. Tap Check For Updates 

Android App

  1. Open the menu in the upper left hand corner
  2. Tap Navdy Display
  3. Tap Check For Updates

 

Install Update Following Transfer From Phone:

Once downloaded to your phone, connecting your phone to Navdy will initiate the transfer. This can take place over multiple trips, so don't worry if it doesn't fully transfer in one drive.

  1. Tap the dial to enter the Menu
  2. Rotate the dial clockwise and select Settings
  3. Rotate the dial clockwise and select Install Update
  4. Leave Navdy powered on while it's updating. It will take 2 minutes to complete.

 

Tip: Navdy will also prompt you to install the update the next time you manually turn Navdy off.

 

Install Dial Software Update (if available):

If a dial update is available we'll present it following the update to Navdy. To check and install an available dial update:

  1. Power on Navdy following its software update
  2. Tap the dial to enter the Menu
  3. Rotate the dial clockwise and select Settings
  4. Rotate the dial clockwise and select Update Dial

 

Was this article helpful?
25 out of 31 found this helpful
Can't find what you're looking for?

Submit your question here

Or ask our Community!